Rolex Cosmograph Daytona 116500LN cheap replica watch has a 40mm x 12.4mm thick oyster shell, made of corrosion-resistant high-temperature alloy 904L steel, which has more polishing properties than ordinary stainless steel. Daytona added a screw-in sleeve to protect the chronograph buttons.
There is nothing to improve the dial design, because the luxury replica Cosmograph Daytona chronograph is probably the most well-known chronograph there. The subdial with silver trim on the dial remains unchanged from the previous model. The bottom central sub-dial at 6 o’clock is the smaller running seconds sub-dial. The chronograph uses the sub-registers at 3 and 9 o’clock to the left and right of this sub-dial.
Everything remains the same from polished steel hour markers with bright fillings to proportions. The easy-to-read Chromalight display uses a long-lasting luminescent material that glows in a bright blue hue in the dark. Like any Rolex replica watches’ Daytona chronograph, the word DAYTONA is printed in red and wrapped around the top of the small seconds at 6 o’clock.
The large central seconds hand of the cheap replica watch sweeps the dial very smoothly through the permanent movement known for Rolex replica watch. The small dial on the right side of the dial at 3 o’clock is a 30-minute counter, and at 9 o’clock on the opposite side of the dial is a 12-hour counter. These three hands are operated smoothly through the chronograph buttons, which are located above and below the winding crown on the right side of the case.
Calibre 4130, a self-winding movement, powers the best replica Daytona watch, which has a diamagnetic blue “Parachrom” balance spring and a second hand for precise time setting. The Oyster bracelet of the watch is made of a three-piece oystersteel steel chain. The two outer links have a brushed surface, while the middle link has a polished finish. The links on both ends of the bracelet are connected to the polished lugs on the case.